Intel Motherboard | AMD Motherboard

Click on the image to buy it.

ASUS P5N32-E SLI Plus is a solid Intel motherboard that won't break the budget, but it also won't break any overclocking records. The nVidia NForce 650i chipset is the limiting factor here. If you do plain old overclocking, I highly recommend additional cooling fans pointed at both the chipset and the fins on the heatpipe. The high points of this Intel motherboard is the dual x16 PCI Express slots, which gamers out there will love. A few other improvements to the Plus motherboard model is the 8 phase power design and solid state polymer capacitors around the CPU socket. For the gamer or enthusiast, the ASUS P5N32-ESLI Plus is a superb motherboard. It's strong, stable, and BioShock played with ease using the hardware.
ASUS P5N32-E SLI Plus motherboard specification :

• Processor : Intel LGA775 processors (45nm ready -- Wolfdale and Yorkfield)
• Chipset : nVidia NForce 650i SLI
• FSB : 533/800/1066/1333 MHz
• Memory : 4 x DDR2 (533/677/800 MHz) up to 8GB
• Audio : SupremeFX Audio Card (ADI 1988B 8-channel High Definition Audio CODEC)
• LAN : nVidia Dual X16 SLI built-in dual Gigabit MAC with external Marvell PHY
• Form Factor : ATX (30.5cm x 24.4cm)
• AGP/PCI/PCIe x16/PCIe x4/PCIe x1 : 0/2/3/0/1
• USB/FireWire/Serial/Paralel : 4(6)/1(1)/0/0
• PATA/SATA/eSATA : 1/6
• Accessories : SLI bridge, ASUS Q-Connector Kit (USB, 1394, system panel; Retail version only), IDE cable, FDD cable, SATA cables, SATA power cable for 4 devices, 2-port USB2.0 module, IEEE1394a module and User manual

Read more about ASUS motherboard

Labels: ASUS, Intel

Labels: Intel, MSI, News

This Intel motherboard comes in a box designed exactly the same way as any other contemporary ECS motherboard. The box is very thin, because there are very few accessories inside. ECS only supplies an Intel motherboard with a user’s manual, installation poster, a CD disk with drivers, one IDE and one SATA cable, and I/O Shield for the rear panel. One piece of each, and no FDD cable at all. If you look at ECS P35T-A motherboard, the design will seem pretty flawless, without any serious issues that would catch your eye right away.
You may notice one thing that is not really typical of ECS motherboards : MOSFET transistors are packed in a close group and covered with a heatsink. Another thing that you have never seen by ECS motherboards before is the electronic components used for the processor voltage regulator circuitry : they used different types of solid-state capacitors. This Intel motherboard uses regular ICH9 southbridge chip without RAID support. There is also an empty spot for the IEEE1394 controller, but it is not laid out on the PCB. There are also three USB pin-connectors that allow up to 6 additional USB 2.0 ports. JMicron JMB361 controller is responsible for the implementation of the eSATA port on the motherboard rear panel and an IDE1 connector that can host up to two Ultra DMA133/100/66 devices. A little disappointed is, there are no fan connectors around the southbridge area. Altogether there are three fan connectors, and they are all in upper left part of the PCB. Sou, you will need to use an extender/converter to connect the front panel fan for air intake. The rear panel of ECS P35T-A motherboard features PS/2 ports for keyboard and mouse, a COM port, eSATA, 6 USB ports, network RJ45 port and six audio-jacks. They used 8-channel Realtek ALC883 codec for audio and a pretty rare on contemporary mainboards Intel 82566DC GigaLAN Controller for network support.
The ECS P35T-A motherboard made a pretty neutral impression : it doesn’t push you away, but also doesn’t really attract at the same time. It cannot overclock very well, but it works fine in nominal mode. It boasts pretty modest set of features and accessories bundle, but offers acceptable PCB design and is free from noisy fans. There is nothing you could really complain about, but at the same time, not much to praise, either.
ECS P35T-A motherboard specification :

• Processor : Intel LGA775 processors (45nm ready -- Wolfdale and Yorkfield)
• Chipset : Intel P35 / ICH9DH
• FSB : 533/800/1066/1333 MHz
• Memory : 4 x DDR2 (677/800 MHz) up to 8GB
• Audio : 8-channel Realtek ALC 883 audio codec (Co-lay ALC888)
• LAN : Intel 82566DC GigaLAN Controller
• Form Factor : ATX (30.5cm x 24.4cm)
• AGP/PCI/PCIe x16/PCIe x4/PCIe x1 : 0/3/2/0/1
• USB/FireWire/Serial/Paralel : 6(6)/0/1/0
• PATA/SATA/eSATA : 1/6/1
• Accessories : User manual, installation poster, driver CD , IDE cable, SATA cable, rear panel I/O Shield.

Read more about ECS motherboard

Labels: ECS, Intel

Click on the image to buy it.

Targeting a motherboard for budget offering is a difficult task because when cutting costs, features tend to get the axe as well. With the Biostar TP35D2-A7 motherboard price "only" around USD $100, Biostar had to leave a few things on this Intel motherboard. Since Firewire Support and multi-GPU CrossFire configurations is not really necessary on such an inexpensive motherboard, Biostar choosed to remove those feature from this Biostar motherboard. We can even live with the fact that the vanilla Intel ICH9 has only four SATA ports and lacks Native Command Queuing and RAID functionality. With Intel's entire ICH9 lineup lacking "parallel" ATA support, Biostar is forced to farm out IDE duties to an auxiliary chip from Marvell.
Unfortunately, the Ethernet performance of Biostar TP35D2-A7 motherboard is harder to ignore. Not only does the motherboard's PCI-based Gigabit Ethernet chip offer throughput that falls well short of the competition, its CPU utilization eclipses 40% with a Core 2 Duo E6700 processor. Poor networking performance of this motherboard is really the only glaring problem with the Biostar TP35D2-A7 motherboard, though. The performance itself is otherwise competitive with Intel P35 motherboards that cost twice as much, and that's pretty impressive all on its own. With a decent array of overclocking and tweaking options in the BIOS, Biostar TP35D2-A7 motherboard is a solid budget board.
Biostar TP35D2-A7 motherboard specification :

• Processor : Intel LGA775 processors (45nm ready -- Wolfdale and Yorkfield)
• Chipset : Intel P35 / ICH9
• FSB : 533/800/1066/1333 MHz
• Memory : 4 x DDR2 (533/667/800 MHz) up to 8 GB
• Audio : 8-channel Intel High Definition Audio (Azalia) -- Realtek ALC888 codec
• Form Factor : ATX (30.5cm x 24.4cm)
• AGP/PCI/PCIe x16/PCIe x4/PCIe x1 : 0/3/1/1/1
• USB/FireWire/Serial/Paralel : 6(6)/0/1/0
• PATA/SATA : 1/4

Read more about Biostar motherboard

Labels: Biostar, Intel

Asus P5K3 Premium motherboard is a gimmicky upgrade to the P5K3 Deluxe. However, unlike other similarly gimmicky enthusiast motherboard products, Asus has really done themselves proud with the motherboard. The quality of the build and components used to make the P5K3 Premium Black Pearl Edition are some of the best to ever make way into a motherboard. The DDR3 memory integration is extremely well done and its performance is superb. Unfortunately, you will not be able to upgrade your onboard memory and that is something that cannot be helped, but 2GB can last most people till the next motherboard upgrade comes along. What can be helped though is the available bandwidth of the onboard memory? Depending on the CPU you use, the memory can scale from DDR3-1066 to beyond DDR3-1600, while maintaining pretty tight timings. Asus made sure though that the memory chosen for the P5K3 Premium motherboard will outlast and outperform the competition for a long time coming.
There is no doubt, the Asus P5K3 Premium Black Pearl Edition motherboard is one of the best DDR3 motherboards you can get today. Of course, you can be expected to shell out major dough for it and that goes without question. Some unconfirmed sources have listed this Intel motherboard initial pricing to be US$1299! Sound ludicrous, but then again that is to be expected from a one-of-a-kind motherboard - just as with real rare black pearls.
Asus P5K3 Premium Black Pearl Edition motherboard specification :

• Processor : Intel LGA775 processors (45nm ready -- Wolfdale and Yorkfield)
• Chipset : Intel P35 / ICH9R
• FSB : 533/800/1066/1333 MHz
• Memory : onboard 2 x 1 GB DDR3 (1333 MHz)
• Audio : Intel High Definition Audio (Azalia) -- ADI AD1988B HD Audio CODEC
• LAN : Realtek RTL8110S PCI Gigabit Ethernet; Marvell 88E8056 PCI Express Gigabit Ethernet; Asus WiFi-AP Solo 802.11g Wireless LAN (Realtek RTL8187L)
• Form Factor : ATX (30.5cm x 24.4cm)
• AGP/PCI/PCIe x16/PCIe x4/PCIe x1 : 0/3/2/0/2
• USB/FireWire/Serial/Paralel : 6(6)/1(1)/0/0
• PATA/SATA/eSATA : 1/6/2
• Accessories : SATA cable, SATA power converter cable, 80-conductor Ultra ATA cable, FDD cable, HSF, USB 2.0 (2 ports) and IEEE 1394a (1 port) bracket, Asus Q-Connector set, Asus WiFi-AP Solo Antenna, I/O shield, Driver CDs and User manual

Read more about Asus motherboard

Labels: ASUS, Intel

Click on the image to buy it.

This MSI motherboard is quite cheap as you can get it for under USD $100. Like its name, MSI K9N4 SLI motherboard will gives you SLI feature for more graphic performance. Not only that, you also get good performance and stable operation from this AMD motherboard. MSI K9N4 SLI motherboard is as usual a high quality AMD Motherboard that was well packed and had good documentation. Unfortunately, MSI only includes the flat IDE cable not a rounded cable. The BIOS menus are awesome and easy to find in and the cell menu relly made it easy to overclock this MSI motherboard.
MSI K9N4 SLI motherboard specification :

• Processor : AMD Socket AM2 processors (AMD Athlon64 X2, Athlon64 and Sempron)
• Chipset : nVidia nForce 500 SLI
• FSB : HyperTransport supporting speed up to 1GHz (2000MT/s)
• Memory : 4 x DDR2 (400/533/677/800 MHz)
• Audio : Chipset integrated by Realtek ALC850 (Compliant with AC97 v2.3 Specs)
• LAN : Supports 10/100/1000 Fast Ethernet by Vitesse VSC8601
• Form Factor : ATX (30.5cm x 24.4cm)
• AGP/PCI/PCIe x16/PCIe x4/PCIe x1 : 0/2/2/0/2
• USB/FireWire/Serial/Paralel : 4(6)/0/1/1
• PATA/SATA : 2/4
• Accessories : Metal rear I/O plate, SATA cable, Flat IDE cable, Manual and driver CD.

Read more about MSI motherboard

Labels: AMD, MSI

Click on the image to buy it.

The newest Express chipsets to found on the shelves holding the gaze of the consumer are the G33 and P35 paired up with the ICH9,DH,R chipset. The official top secret code name assigned by Intel to the chipsets is "Bear Lake". A few of those include full 1333MHz processor and DDR3 support which has already made some huge waves among overclockers. Other features the new chipset supports are Intel ViiV Processor technology support for digital home entertainment, Rapid Recover Technology, Turbo memory for improving boot times, Quiet System and Matrix Storage Technologies via the Intel I/O Controller Hub.
Asus P5K3 Deluxe WiFi-AP motherboard presentation is what you would expect in terms of what Asus wants you to understand about what your are buying. The first thing you notice about the board is all of the copper which makes up the Asus Stack Cool 2. What you really see is a copper heat pipe cooled network of sorts placed over the most important components that always get the hottest during any type of operations especially when overclocked. This includes the PWM components and chipsets with the Northbridge getting the largest between the two. The small heat pipe network spans completely around the CPU socket allowing enough room to install your own large CPU cooler. There is a great deal of thought put in to the P35 based motherboards.
Asus had put serious effort in to planning and designing the layout. Take a look, the largest connection ports are at the very edge of Asus P5K3 Deluxe WiFi-AP motherboard which is just about the safest place possible. Everything else is either low profile such as the solid state capacitors and peripheral sockets whether PCI or storage based. Interestingly, the entire this Intel motherboard's profile isn't any taller than the heat pipes, RAM modules, or I/O ports on the back of the motherboard. You can have up to 8GB of DDR3 of any frequency. Of course, the best DDR3 will naturally operate better under any serious overclocking. The P5K3 Deluxe WiFi-AP Edition motherboard is one of the most solid motherboard. The bottom line is very simple. This is an extremely solid performer and offers a great deal all around from the BIOS to the design. Everything about the board says performance and stability. Overclockers will definitely enjoy playing around with the motherboard. It affords a nice array of settings, features, and options that are all but guaranteed to show you what it can do. Just make sure your memory, power supply, and CPU cooler are up to the task. The Asus P5K3 Deluxe WiFi-AP Edition Motherboard is a perfectly balanced enthusiast board for any and every type of desktop user.
Here is some technical data about this Asus motherboard :

• Processor : Intel LGA775 processors (45nm ready -- Wolfdale and Yorkfield)
• Chipset : Intel P35 / ICH9R with Intel Fast Memory Access Technology
• FSB : 800 / 1066 / 1333 MHz
• Memory : 4 x DDR3 (800/1066/1333 MHz)
• Multiplier : Auto
• Form Factor : ATX (30.5cm x 24.4cm)
• AGP/PCI/PCIe x16/PCIe x4/PCIe x1 : 0/3/2/0/2
• USB/FireWire/Serial/Paralel : 6(4)/1(1)/0/0
• PATA/SATA : 1/6
• Accessories : UltraDMA 133/100/66 cable, FDD cable, 6 x SATA cables, 1 x 2-port SATA power cable, I/O Shield, User's manual, ASUS WiFi-AP Solo manual, 3 in 1 Q-connector, 1 x 2-port USB2.0 / 1-port IEEE1394 module, Optional Fan for Water-Cooling or Passive-Cooling only, ASUS WiFi-AP Solo omni-directional antenna

Read more about Asus motherboard

Labels: ASUS, Intel

ECS out fitted the ECS KN3 SLI2 motherboard with four RAM slots that support DDR2 400/533/667/800 MHz memory modules. ECS's KN3-SLI2 expansion arrangement from top to bottom is PCI Express x16 Slot, PCI Express x1 slot, PCI Express x1 slot, PCI Express x16 slot, PCI and finally PCI. There are 7 SATA ports on the board, with 5 controlled by the MCP55XE Southbridge, and two SATA ports controlled by a JMB363 controller. The external SATA port is controlled by the NVIDIA MCP55XE. MCP55XE controller supports RAID 0, 1, 0+1, 5, JBOD and NCQ. The JMB363 controller supports RAID 0, 1 and RAID 0+1.
Other ECS KN3 SLI2 motherboard features include Realtek ALC883 audio codec for 8-channel HD audio and 8 x USB 2.0, Dual Gb Ethernet, 2 x S/PDIF and 2 x 1394a. ECS also included the ECS Top-Hat Flash kit, allowing you to restore the BIOS in case your current BIOS chip becomes corrupted. The KN3 SLI2 sports an interesting auto overclocking feature termed IOC (Instant Overclocking Controller) that enables the system to automatically boost frequency, by detecting changes in CPU loads. The I/O back plate incorporates a fan to cool the MOSFETs and the CPU area.
The ECS KN3 SLI2 motherboard is a well rounded, good performing AM2 motherboard. The component color coding stands out in a crowd and will be liked by those looking for a little bling effect. The features are loaded with expansive storage, 8-channel integrated HD audio, and SLI graphics capabilities featuring full-bandwidth dual PCI-Express GPU support. If you are on a budget and contemplating a 590 SLI based motherboard to operate your dual graphics card system, you can try this ECS's motherboard.
Here is the technical specification of ECS KN3 SLI2 motherboard :

• Processor : AMD Socket AM2 processors
• Chipset : nVidia nForce 590 SLI
• FSB : 400 / 800 / 1200 / 1600 / 2000 MHz
• Memory : 4 x DDR2 (400/533/677/800 MHz)
• Audio : 8-channel High-Definition audio (Realtek ALC888)
• Form Factor : ATX (30.5cm x 24.4cm)
• AGP/PCI/PCIe x16/PCIe x4/PCIe x1 : 0/2/2/0/2
• USB/FireWire/Serial/Paralel : 4(6)/0(2)/1/0
• PATA/SATA/eSATA : 2/7/1

Read more about ECS motherboard

Labels: AMD, ECS

Click on the image to buy it.

nVidia's GeForce 7050PV chipset includes a dedicated Video Processing Engine especially for High-Definition video - this is known as PureVideo. PureVideo supports hardware accelerated MPEG, VC-1 and WMV9 video decoding for greater energy efficiency (or, longer battery life where notebooks are concerned), as it helps to reduce CPU utilisation while watching movies. In addition, there are post processing features like Motion Adaptive De-interlacing, High Quality video scaling with improved inverse telecine algorithms like 2:2 and 3:2 pull-down correction. There is also support for Microsoft Video Mixing Renderer (VMR) for multiple, independent video playbacks at full quality and definition. GeForce 7050PV chipset also support native HDCP and integrates HDMI 1.2 on-board. Seeing as there’s no decoder or receiver that can work with Dolby TrueHD or DTS Master HD audio over a digital connection and the fact that Windows itself is still limited to just 24-bit colour (+8-bit alpha = “32-bit”) with no support for 36-bit colour (Deep Colour) on the horizon, HDMI 1.3 support is fairly pointless at the moment. The GeForce 7050PV chipset includes native TV out support as well, meaning you can also use either composite, S-video or component outputs. This gives the 7050PV chipset a competitive feature set compared to AMD's 690G, and makes it a potential HTPC chipset of choice.
You can see a short technical documentation of Biostar TF7050-M2 motherboard below :

• Processor : AMD Socket AM2 processors
• Chipset : nVidia nForce 630a (with integrated GeForce 7050PV)
• FSB : 400/800/1200/1600/2000 MHz by Hypertransport Technology
• Memory : 4 x DDR2 (400/533/677/800 MHz)
• Audio : 8-channel High-Definition audio (Realtek ALC888)
• Form Factor : micro-ATX (24.4cm x 24.4cm)
• AGP/PCI/PCIe x16/PCIe x4/PCIe x1 : 0/2/1/0/1
• USB/FireWire/Serial/Paralel : 4(6)/0/0(1)/0(1)
• PATA/SATA : 1/4
• LAN : Realtek GigaLAN 8111B (supporting 10/100/1000 Gigabit Ethernet over PCI-Express)
• Accessories : A black zip pouch, HDMI to DVI adapter, One red SATA cable, One Molex to SATA power adapter, Metal rear I/O plate, IDE and floppy cable, Manual and driver CD.

Read more about Biostar motherboard

Labels: AMD, Biostar

Click on the image to buy it.

In the past, nVidia have produced some of the best enthusiast chipsets around, most notably perhaps their nForce 4 for the old AMD 939 systems. Still, times have changed now and for quite a while Intel's 965P and 975P based motherboards were the way to go with LGA 775 systems. However, in recent times nVidia have clawed their way back in with their feature packed 680i motherboards. The MSI P6N-Diamond which promises great overclocking, a chock load of features and excellent cooling to boot. MSI P6N Diamond motherboard was featured with an innovation technology, such as Dual Core Center, Live Update 3, CoreCell 2, DOT Express and MSI Advanced Live Update Online.
The technical data of MSI P6N Diamond motherboard are :

• Processor : Intel LGA775 processors (45nm ready -- Wolfdale and Yorkfield)
• Chipset : nVidia nForce 680i SLI
• FSB : 533 / 800 / 1066 / 1333 MHz
• Memory : 4 x DDR2 (533/677/800 MHz)
• Audio : Creative Sound Blaster X-Fi Xtreme HD Audio
• Form Factor : ATX (30.5cm x 24.4cm)
• AGP/PCI/PCIe x16/PCIe x4/PCIe x1 : 0/3/4/0/1
• USB/FireWire/Serial/Paralel : 4(6)/1(1)/0/0
• PATA/SATA/eSATA : 1/6/1(1)
• LAN : Supports 10/100/1000 Fast Ethernet by NVIDIA

Read more about MSI motherboard

Labels: Intel, MSI

With the announcement of quad-core processors, 45nm technology, DDR3 and Bearlake, Intel's initial codename for their P35 series of chipset, MSI kick-started their PC2008 campaign with a fresh range of products that features next generation technology moving into the year 2008. The MSI P35 Platinum motherboard reviewed a little more than a month ago was their flagship computer motherboard based on the Intel P35 chipset and featuring their Circu-Pipe cooling technology.
Since the computer motherboard market isn't just made up of overclockers and enthusiasts, MSI has a comprehensive lineup of their new Bearlake motherboards for the masses, all featuring their new PC2008 market branding, which incidentally is a mechanized bear claw. At the entry-level segment, there are the MSI P35 Neo motherboard and its hybrid brother, the P35 Neo Combo.
The P35 Neo Combo is the mainstream entry motherboard in this lineup, with full support for Intel's upcoming 45nm processors as well as native 1333MHz FSB. With the dual memory controller of the P35 chipset, the P35 Neo Combo motherboard carries both DDR2 and DDR3 memory slots to allow for an easier transition and upgrading in the future. As a budget motherboard, the P35 Neo Combo comes with a small set of bundled peripherals, but surprisingly a healthy amount of connector brackets are included. Be aware however, that MSI lists the USB and FireWire bracket as 'optional', so they may not be included in the standard box in certain areas.
The list bellow is some technical data of this MSI computer motherboard :

• Processor : Intel LGA775 processors (45nm ready -- Wolfdale and Yorkfield)
• Chipset : Intel P35 / ICH9
• FSB : 800 / 1066 / 1333 MHz
• Memory : 2 x DDR2 (533/677/800/1066 MHz); 2 x DDR3 (800/1066/1333 MHz)
• Multiplier : Auto
• Form Factor : ATX (30.5cm x 24.4cm)
• AGP/PCI/PCIe x16/PCIe x4/PCIe x1 : 0/2/1/0/3
• USB/FireWire/Serial/Paralel : 4(8)/1(1)/1/1
• PATA/SATA/eSATA : 1/5/0
• Audio : Intel High Definition Audio (Azalia); Realtek ALC888 HD Audio CODEC

To view full specification of this computer motherboard, click on the link.

Labels: Intel, MSI

With Wi-Fi word in its name, it indicates that this Abit motherboard is bundled with an additonal AirPace Wi-Fi wireless card. With the AirPace Wi-Fi, abit is pioneering in the implementation of high-performance Wi-Fi devices using the PCIe high-speed interface. This universal IEEE 802.11b/g (up to 54Mbps) standard Wi-Fi card offers the flexibility to be used in any PCIe slot on its motherboard. It also offers a convenient software AP function. For give a best stability on its computer motherboard, Abit uses solid state capacitors to reduce heat buildup and offer the best voltage regulation, thereby increasing performance while extending the product life, even under the most stressful conditions. The some great of this Intel motherboard is Abit IN9 32X-MAX Wi-Fi provides 3 x PCIe x16 slots. Using these slots you will get True x32 SLI graphics for all the future proof options you could ever need for high-end gaming and a further x8 bandwidth for physics rendering. There are 2 x PCIe X16 for dual graphics and SLI, and the other one is 1 x PCI-E X16 (X8 bandwidth) for additional physics card.
Here is some technical data about this Intel motherboard :

• Processor : Intel LGA775 processors
• Chipset : Nvidia nForce 680i SLI
• FSB : 800 / 1066 / 1333 MHz
• Memory : 4 x DDR2 (677/800/1066 MHz)
• Multiplier : Auto
• Form Factor : ATX (30.5cm x 24.4cm)
• AGP/PCI/PCIe x16/PCIe x4/PCIe x1 : 0/2/3/0/2
• USB/FireWire/Serial/Paralel : 4(3)/0(2)/0/0
• PATA/SATA/eSATA : 1/6/2

Click on the link to get more informations about this computer motherboards specs.

Labels: Abit, Intel

Labels: Intel, News

Foxconn P9657AA-8EKRS2H is a Intel motherboard that uses Intel P965 chipset. As we know together this chipset is intended to be situated somewhere in between the 945P and 975X chipset in terms of features and performance. However it has a newer southbridge than either of them, which adds up to 6 native SATA-II ports in your motherboard. Intel has finally done away with the PATA interface though, so the computer motherboard makers are left with using a third-party chip to allow the installation of an optical drive. Like most, Foxconn has gone with the JMicron JMB363, which also adds some extra SATA-II ports, e-SATA, and even basic software RAID functions.
With both the ICH8-R and JMicron JMB363 controller being used, the P9657AA supports an impressive 7 SATA drives; 6 directly from the ICH-8R and 1 e-SATA port on the rear panel. Note that to make use of the hot-swapping function, RAID drivers need to be installed. In legacy mode, both controllers are detected for a proper Windows XP installation. FireWire IEEE1394a is handled by the VIA VT6308P controller, which does not have the Windows XP SP2 driver issue, so it will work properly without need for hotfixes or special drivers that cost money.
Some flaws is, there are only 4 USB ports on the motherboard's rear panel (although having an e-SATA port kind of makes up for it, they could have done away with the COM port and added a bracket adapter for the very few who will ever use it). There is no digital audio input on the rear panel (there is an internal connector for a digital input adapter, but one is not included in the box), and output is handled by Optical S/PDIF instead of Coaxial.
The some technical data for Foxconn P9657AA-8EKRS2H motherboard are :

• Processor : Intel LGA775 processors
• Chipset : Intel P965 / ICH8R
• FSB : 533 / 800 / 1066 MHz
• Memory : 4 x DDR2 (533/677/800 MHz)
• Multiplier : Auto
• Form Factor : ATX (30.5cm x 24.4cm)
• AGP/PCI/PCIe x16/PCIe x4/PCIe x1 : 0/3/1/1/1
• USB/FireWire/Serial/Paralel : 4(6)/1(1)/1/1
• PATA/SATA/eSATA : 1/6/1

Read more about this computer motherboard.

Labels: Foxconn, Intel

Comes with Intel P35 chipset, make Biostar TP35D3-A7 Deluxe motherboard supports native DDR3 1333 MHz. The DDR3's prefetch buffer width is 8 bit, whereas DDR2's is 4 bit, and DDR's is "only" 2 bit. Theoretically, these modules could transfer data at the effective clockrate of 800-1600MHz (for a single clock bandwidth of 400-800MHz), compared to DDR2's current range of 400-1066 MHz (200-533 MHz) or DDR's range of 200-600 MHz (100-300 MHz). To date, such bandwidth requirements have been mainly on the graphics market, where fast transfer of information between framebuffers is required. Biostar uses solid capacitor for this motherboard, so it provides extreme durability and secure performance of your system.
SPACE–Pipe is a new silent north bridge cooling device. It uses a heat-pipe to conduct heat from the chipset heatsink to a PWM fin-heatsink collection module. Airflow from the CPU fan then removes the heat collected from the CPU, the chipset, and PWM fin-heatsink, effectively cooling your system with no additional noise. And all of this is based on materials used in the space industry. This SPACE-Pipe technology lets your computer becomes more silent. Beside of that, there are some Biostar innovations technology such as "Clean-Tone" Audio design (reduces high frequencies noise generated by a motherboard), ONE (Overclock Navigator Engine), T-Power (All in one utility interface), Rapid Switch (the Power and Reset buttons are built on-board) and another innovative features. Unfortunately, this Intel motherboard doesn't provide FireWire connector.
Let's take a look of some technical data about this Biostar's motherboard :

• Processor : Intel LGA775 processors
• Chipset : Intel P35 / ICH9R
• FSB : 800 / 1066 / 1333 MHz
• Memory : 4 x DDR3 (800/1066/1333 MHz)
• Multiplier : Auto
• Form Factor : ATX (30.5cm x 24.4cm)
• AGP/PCI/PCIe x16/PCIe x4/PCIe x1 : 0/2/1/0/3
• USB/FireWire/Serial/Paralel : 6(3)/0/1/1
• PATA/SATA/eSATA : 1/6/4
• Accessories : IDE Cable, FDD Cable, SATA Cable, SATA Power Cable, S/PDIF Cable, Real I/O Panel, Fully Setup Driver, User Manual

Read more about this Intel motherboard.

Labels: Biostar, Intel

On the outset, Foxconn P35A motherboard is not really all the different from your run of the mill entry-level boards out there. It uses one of the latest core logic chipsets available for the Intel LGA775 platform, but is scaled down in terms of features for the mainstream motherboard market. However, this Intel motherboard features dual PCIe x16 slots that support ATI CrossFire multi GPU configurations, which is what makes this particular motherboard stand out. It also shows that full solid capacitor designs have finally caught up to low end computer motherboard models as well.
Here is some technical data about this Intel motherboard :

• Processor : Intel LGA775 processors (45nm ready -- Wolfdale and Yorkfield)
• Chipset : Intel P35 / ICH9
• FSB : 533 / 800 / 1066 / 1333 MHz
• Memory : 4 x DDR2 (677/800/1066 MHz)
• Multiplier : Auto
• Form Factor : ATX (30.5cm x 24.4cm)
• AGP/PCI/PCIe x16/PCIe x4/PCIe x1 : 0/3/2/0/1
• USB/FireWire/Serial/Paralel : 4(6)/0/0/1
• PATA/SATA/eSATA : 1/4/1
• Accessories : SATA data cables, SATA power converter cables, 80-conductor Ultra ATA data cable, floppy drive data cable, USB 2.0 (2 ports) and eSATA port bracket, I/O shield, Driver CDs, User's manual

Visit the link to read more about this computer motherboard specs.

Labels: Foxconn, Intel

This ECS motherboard that comes with purple color, uses AMD 580X Crossfire chipset for AMD socket AM2 platform. This chipset already supported ATI Crossfire Xpress 3200 technology that is the first unrestricted 2x16 PCI Express solution. The 999 DIMM makes the DDR eliminate data highway quality issues and support increased overclocking.
ECS gives this motherboard Dr. LED for diagnosing PCI slots health, Port Multiplier to enable PC connect with maximum 5 external HDD per port and also RAID 5 function, Anti-Burn Guardian to give an alert before inserting or removing memory module an another innovative features. To deliver better personal productivity and digital entertainment on your computer, this AMD motherboard was already certificated by Microsoft. So, you will get reliability, security, and performance on it.
Some technical data about ECS KA3 MVP motherboard are listed bellow :

• Processor : AMD Socket AM2 processors
• Chipset : AMD 580X Crossfire / AMD SB600
• FSB : 400/800/1200/1600/2000 MHz by Hypertransport Technology
• Memory : 4 x DDR2 (400/533/677/800 MHz)
• Multiplier : Auto
• Form Factor : ATX (30.5cm x 24.4cm)
• AGP/PCI/PCIe x16/PCIe x4/PCIe x1 : 0/2/2/0/1
• USB/FireWire/Serial/Paralel : 4(3)/0(2)/0/1
• PATA/SATA/eSATA : 2/6/0

Read more about this motherboard

Labels: AMD, ECS

This computer motherboard is the best AMD 690G implementation, offering a full suite of overclocking features in addition to onboard VGA, DVI, and HDCP-compliant HDMI output, TOS-Link digital S/PDIF audio output, PCI Express x4 and x16 expansion capabilities, Firewire, and four DIMM slots. HD video playback may get AMD's 690G redux more headlines, but given its hardware requirements, the combination of BIOS-level overclocking options and a second wave of more mature, feature-rich motherboards may ultimately prove more attractive to enthusiasts. With the "free" overclocking headroom available with many of AMD's budget Athlon X2 processors, squeezing at least 2.4GHz from a 3600+ may not take too much effort, either. If you install Windows 64-bit, you can uses a system memory up to 16GB with 4 DDR2 slots that be provided. Otherwise, you only can use max 4GB on it.
The some technical data about this AMD motherboard are listed bellow :
Processor : AMD Socket AM2 processors
Chipset : AMD 690G / ATI SB600
FSB : 400/800/1200/1600/2000 MHz by Hypertransport Technology
Memory : 4 x DDR2 (400/533/677/800 MHz)
Multiplier : Auto
Form Factor : ATX (30.5cm x 24.4cm)
AGP/PCI/PCIe x16/PCIe x4/PCIe x1 : 0/2/1/1/3
USB/FireWire/Serial/Paralel : 4(3)/1(2)/0/1
PATA/SATA/eSATA : 1/4/0
Audio : 7.1+2 Channel High Definition Output; Realtek ALC889A HD Audio CODEC
Read more about this motherboard.

Labels: AMD, Gigabyte

Systemax and VIA announced a new energy efficient desktop PC. This computer is powered by a 1.5GHz VIA C7-D desktop processor and VIA motherboard for the US market. This processor has a maximum power consumption of 20W, along with the low-power VIA pc2500 motherboard and VIA CN700 digital media chipset with an integrated VIA UniChrome Pro II graphics processor.
This new Systemax PC model is available at several US online retail stores in two versions, one with Microsoft Windows XP Home for US$ 299.99, while the other is available for US$ 399.99 with Microsoft Windows XP Professional.
Here is the specification of this computer :

• Processor : VIA C7-D 1.5GHz
• Chipset : VIA CN700 Digital Media IGP / VT8237R Plus
• Graphics : VIA UniChrome Pro II
• Memory : DDR2 400/533 512MB up to 2GB

Read more about this computer

Labels: News

Labels: AMD, News

Labels: Gigabyte, Intel

Labels: Intel, News

Labels: AMD, News

Labels: ECS, Intel, News

Labels: ECS, Intel, News

Labels: AMD, News

Serial ATA (SATA) is a computer bus primarily designed for transfer of data between a computer and storage devices (like hard disks or optical drives). The main benefits are thinner cable that let air cooling work more efficiently, faster transfers, ability to remove devices while operating (Hot swapping), and more reliable operation with tighter data integrity checks. It was designed as a successor to the legacy Advanced Technology Attachment (ATA) standard, and is expected to eventually replace the older technology (retroactively renamed Parallel ATA or PATA). Serial ATA adapters and devices communicate over a high-speed serial link.

1. SATA 1.5 Gbit/s
First-generation SATA interfaces (also known as SATA/150 or (unofficially) as SATA 1) has actual uncoded transfer-rate at 1.2 Gbit/s or 150 MB/s. In actual operation, SATA/150 and PATA/133 are comparable in terms of their theoretical burst-throughput. However, newer SATA devices offer enhancements (such as native command queuing) to SATA's performance in a multitask environment. For comparison, modern desktop hard drives transfer data at a maximum of ~90 MB/s, which is well within the performance capabilities of even the older PATA/133 specification.
2. SATA 3.0 Gbit/s
On this version, a 3 Gbit/s signaling rate was added to the Physical layer (PHY layer), effectively doubling data throughput from 150 MB/s to 300 MB/s. SATA/300's transfer rate is expected to satisfy drive throughput requirements for some time, as the fastest desktop hard disks barely saturate a SATA/150 link. This is why a SATA data cable rated for 1.5 Gbit/s will currently handle second generation, SATA 3.0 Gbit/s sustained and burst data transfers without any loss of performance.
About compatibility issue, SATA/300's autonegotiation sequence is designed to fallback to SATA/150 speed (1.5 Gbit/s rate) when in communication with such devices. In practice, some older SATA controllers do not properly implement SATA speed negotiation. Affected systems require user-intervention to manually set the SATA 3.0 Gbit/s peripherals to 1.5 Gbit/s mode, generally through the use of a jumper.
The 3.0 Gbit/s specification has been very widely referred to as “Serial ATA II” (“SATA II”), contrary to the wishes of the Serial ATA standards organization that authored it. The official website notes that SATA II was in fact that organization's name at the time, the SATA 3.0 Gbit/s specification being only one of many that the former SATA II defined, and suggests that “SATA 3.0 Gbit/s” be used instead.
3. SATA 6.0 Gbit/s
SATA's roadmap includes plans for a 6.0 Gbit/s standard. In current PCs, SATA 3.0 Gbit/s already greatly exceeds the sustainable (non-burst) transfer rate of even the best hard disks. The 6.0 Gbit/s standard is right now useful in combination with port multipliers, which allow multiple drives to be connected to a single Serial ATA port, thus sharing the port's bandwidth with multiple drives. Solid-state drives such as RAM disks may also one day exploit the faster transfer rate.
4. External SATA
Standardized in mid-2004, eSATA defined separate cables, connectors, and revised electrical requirements for external applications :
• Minimum transmit potential increased: Range is 500–600 mV instead of 400–600 mV.
• Minimum receive potential decreased: Range is 240–600 mV instead of 325–600 mV.
• Identical protocol and logical signaling (link/transport-layer and above), allowing native SATA devices to be deployed in external enclosures with minimal modification.
• Maximum cable length of 2 m (USB and FireWire allow longer distances)
Aimed at the consumer market, eSATA enters an external storage market already served by the USB and FireWire interfaces.

Labels: Knowledge

While most people who read computer motherboard reviews focus their attention on high end enthusiast motherboards meant to push every component to the very edge, the truth is theres a large segment of our society who don't need $300 motherboards, $600 video cards, or $2500 systems. For these people, a simple computer for browsing the internet, sending email, reading news, and maybe watching a DVD is more than enough.
Intel's G33 Express chipset will never be confused with its more desirable siblings, the mainstream P35 or the soon to be released enthusiast X38 chipsets when it comes to all out performance, it does feature, among other things, Intel's GMA3100 integrated graphics (which includes Intel's "Clear Video Technology"), HDMI support, as well as HD Audio, making it a very attractive option for those on a tight budget or those looking for an inexpensive HTPC system.
The short specifications of this computer botherboard are :
Processor : Intel LGA775 processors
Chipset : Intel G33 / ICH9
FSB : 800 / 1066 / 1333 MHz
Memory : 4 x DDR2 (677/800 MHz)
Multiplier : Auto
Form Factor : Micro-ATX (30.5cm x 24.4cm)
AGP/PCI/PCIe x16/PCIe x4/PCIe x1 : 0/2/1/0/1
USB/FireWire/Serial/Paralel : 4(4)/1(1)/1/1
PATA/SATA/eSATA : 0/4/0
Audio : Realtek ALC883 support 8-ch HD Audio
See more about this Intel motherboard...

Labels: ECS, Intel

Around about a couple of years ago, it was hard to find motherboards of a large variety for the Intel processor platform. Pentium 4 was really a sour spot with the computer motherboard producers. On the other hand, chipsets for AMD’s Athlon 64 processors were plentiful - nVidia, SiS, ULi, ATI and even VIA technologies all had chipsets out to take some market share for Athlon 64. Now the tables have turned - AMD is on the back burner, while there are chipsets still being made for AMD processors, clearly Core 2 has given Intel new life, and chipsets from the major vendors are coming in hard and fast, for example this nForce 680i chipset from nVidia.
Today we are looking at another contender for the Core 2 market using the nVidia nForce 680i chipset being Foxconn with their obscurely named N68S7AA-8EKRS2H motherboard. Foxconn has been known in the past for the more budget conscious computer motherboards, not wanting to take on the big boys like MSI, ASUS, Gigabyte and the likes who really push overclocking to its limits but it seems like they mean business now and are ready for the challenge.

Here is the specifications of the Foxconn N68S7AA-8EKRS2H motherboard :

Foxconn N68S7AA-8EKRS2H
Processor	Supports All Socket T (LGA775) Series CPU (Netburst and Core Series)
Chipset	nVidia nForce 680i : - nVidia C55XE Northbridge - nVidia MCP55XE Southbridge Hyper Transport Link
Front Side Bus	- 100/133/200/266/1333 MHz Internal - 400/533/800/1066/1333 MHz External
Memory	- 4 x DDR2 SDRAM 240pin DIMM Sockets - Supports DDR2-533/667/800/1066Mhz - 64/128Bit Dual Channel - Supports up to 4GB Total Memory (4x 1GB)
Expansion Slots	- 3 x PCI Express x16 - 2 x PCI Express x1 - 2 x PCI
Connectivity	- 1 x Parallel ATA Port (2 Drives Total) - 6 x Serial ATA ports - 1 x eSATA Port - 2 x Gigabit Ethernet Port
Expansion Ports	1 PS2 Keyboard Port 1 PS2 Mouse Port 10 USB 2.0 Ports (4 rear accessible, 6 via expansion bracket) 6 Stereo Audio Ports 1 e.SATA Port 1 RCA SPDIF Port 1 Toslink SPDIF Port 2 Firewire Ports (1 rear accessible. 1 via expansion bracket) 2 RJ45 LAN Ports
Form Factor	ATX Form Factor, 30.5cm x 24.5cm

Visit the link to read more about this computer motherboard specs.

Labels: Foxconn, Intel

Labels: AMD, News

Both of these motherboards look identical, the only difference is that the Extreme uses DDR3 while the Formula uses DDR2. Other than that, it is very difficult to finding physical differences between them. The Blitz motherboards use Intel's P35 chipset and pack more features than you can shake a stick at. These motherboards have a better Crossfire capabilities, because Asus use a special chipset called CrossLinx, which effectively makes each PCIe slot function as 8x, instead of the 16x 4x combination like in the ASUS Commando.
These computer motherboards also have a northbridge with heatsink ready for water, Voltiminder LEDs, Extreme Tweaking ability, external LCD Poster, Supreme FX II sound card, on-board power on/off and reset, in addition to a quick BIOS reset, Q-Connector, spare chipset fans, feet for an external install, temperature diodes, STALKER and 3D Mark 06. The LCD poster is used to connecting a port on the motherboard and can sit on your computer or desk. Whenever the BIOS makes a query, it will display on this poster. When nothing is going on, a digital clock is displayed instead. This is all done on a very bright blue backlit screen.
Here is some technical data about this Intel motherboard :
Processor : Intel LGA775 processors (include Intel next generation 45nm Multi-Core CPU)
Chipset : Intel P35 / ICH9R with Intel Fast Memory Access Technology
FSB : 800 / 1066 / 1333 MHz
Memory : 4 x DDR2 (677/800/1066 MHz) -- Formula version; 4 x DDR3 (800/1066/1333 MHz) -- Extreme version
Multiplier : Auto
Form Factor : ATX (30.5cm x 24.5cm)
AGP/PCI/PCIe x16/PCIe x4/PCIe x1 : 0/2/2/0/3
USB/FireWire/Serial/Paralel : 6(6)/1(1)/0/0
PATA/SATA/eSATA : 1/6/0
Accessories : Fusion Block System Accessory, LCD Poster, DIY Pedestal ASUS Optional Fan, SupremeFX II Audio Card, 3 in 1 ASUS Q-Connector Kit , UltraDMA 133/100/66 cable, Floppy disk drive cable, SATA cables, SATA power cables, 2-port USB2.0 + IEEE 1394a module, I/O Shield, Cable Ties, User's manual
Read more about this motherboard.

Labels: ASUS, Intel